LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Malibu LS, 2.4L Eng VIN 1 >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Engine Controls/Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Accelerator Pedal with Position Sensor Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Disconnecting Accelerator Pedal Position Sensor Electrical Connector
    GM1544734Courtesy of GENERAL MOTORS COMPANY
  1. Install the APP sensor (2).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the APP bolts (1) and tighten to 10 N.m (89 lb in).
  3. Connect the APP sensor electrical connector.
  4. Confirm that the APP sensor connector locking clip is fully secured.
scientia non olet · About LEMON Manuals