LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Impala LS, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Engine Exhaust System) >> Repair Instructions >> Exhaust Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the heat shield to the underbody.
    2. Fig 1: Identifying Exhaust Resonator Heat Shield Rivets
    GM1681509Courtesy of GENERAL MOTORS CORP.
  2. Install NEW rivets (1) attaching the resonator heat shield to the underbody.
  3. Install muffler. Refer to Muffler Replacement .
scientia non olet · About LEMON Manuals