Knock Sensor Replacement - Bank 1
Knock Sensor Replacement - Bank 1
| Callout | Component Name |
|---|---|
| Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Bolt
CAUTION:
Refer to Fastener Caution . Tighten 25 N.m (18 lb ft) |
| 2 | Bolt Tighten 58 N.m (42 lb ft) |
| 3 | Exhaust Manifold Lower Heat Shield |
| 4 | Bolt Tighten 23 N.m (17 lb ft) |
| 5 | Knock Sensor Procedure Disconnect the electrical connector. |