LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Impala LS, Gas >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement - Bank 1 >> Removal Procedure

Removal Procedure

  1. Remove the intake manifold. Refer to Intake Manifold Replacement .
    2. Fig 1: Engine Wiring Harness Electrical Connectors
    GM2614990Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s).
    3. Fig 2: Ignition Coils And Bolts
    GM2614951Courtesy of GENERAL MOTORS COMPANY
  3. Remove the ignition coil bolt(s) (1).
  4. Remove the ignition coil(s) (2).
scientia non olet · About LEMON Manuals