LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Equinox LS, AWD, Gas >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Wheel Speed Sensor
    GM2249468Courtesy of GENERAL MOTORS COMPANY
  1. Install the wheel speed sensor (1) to the steering knuckle.
    2. Fig 2: Wheel Speed Sensor Bolt
    GM2249467Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the wheel speed sensor bolt (1) and tighten to 10 N.m (89 lb in).
    3. Fig 3: Front Brake Hose Bracket Nut
    GM2249464Courtesy of GENERAL MOTORS COMPANY
  3. Install the front brake hose bracket nut (1) and tighten to 10 N.m (89 lb in).
  4. Connect the wheel speed sensor electrical connector.
  5. Install the front wheel speed sensor harness to the retainers on the front brake hose.
  6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
scientia non olet · About LEMON Manuals