LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LT, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 353 (HVAC System - Manual) >> Repair Instructions >> Mode Control Cam Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2014 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Mode Control Cam
    GM2027962Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The mode control cam can only be fitted in one position.

  1. Install the mode control cam (1).
    2. Fig 2: Instrument Panel Tie Bar, Bolts And Nuts
    GM2027821Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution

  2. Install the instrument panel tie bar (2).
    • Install the 4 instrument panel tie bar bolts (3, 4) and tighten to 19 N.m(17 lb ft).
    • Install the 2 instrument panel tie bar nuts (1) and tighten to 9 N.m(80 lb in).
    3. Fig 3: Instrument Panel Wiring Harness And Instrument Panel Tie Bar
    GM2027818Courtesy of GENERAL MOTORS COMPANY
  3. Install the instrument panel wiring harness (2) from the instrument panel tie bar (1).

    Connect the electrical connectors.

  4. Install the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
scientia non olet · About LEMON Manuals