Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Mode Control Cam

Courtesy of GENERAL MOTORS CORP.

NOTE: The mode control cam can only be fitted in one position.

Install the mode control cam (1).

Fig 2: View Of Instrument Panel Tie Bar, Bolts And Nuts

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution

Install the instrument panel tie bar (2).
- Install the 4 instrument panel tie bar bolts (3, 4) and tighten to 19 N.m(17 lb ft).
- Install the 2 instrument panel tie bar nuts (1) and tighten to 9 N.m(80 lb in).

Fig 3: View Of Instrument Panel Wiring Harness And Instrument Panel Tie Bar

Courtesy of GENERAL MOTORS CORP.

Install the instrument panel wiring harness (2) from the instrument panel tie bar (1).
Connect the electrical connectors.
Install the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .