Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lower And Upper Rear Spring Insulators

Courtesy of GENERAL MOTORS CORP.

Install the lower and upper rear spring insulators (1, 2).

Fig 2: Identifying Spring

Courtesy of GENERAL MOTORS CORP.

NOTE: If the spring is equipped with tags, ensure that the tags are at the upper rear portion of the spring. If marks were made during removal, ensure the marks are properly aligned.

Install the spring (1) making sure the lower coil is seated into the lower spring seat.
Using the jack stands, raise the rear axle in order to compress the rear springs.
Install the lower shock absorber bolts. Refer to Shock Absorber Replacement .
Lower the vehicle.