LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LT, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C0280 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify that DTC C0186, C0196, C019B, or C0710 is not set.
  2. Ignition OFF, inspect the B99 Steering Wheel Angle Sensor and B119 Multi-axis Acceleration Sensor for correct installation.
    • If loose or incorrect installation is diagnosed, correct the installation of the component.
  3. Replace the K17 Electronic Brake Control Module (EBCM) and verify DTC does not reset.
    • If the DTC resets, replace the Q5 brake pressure modulator valve assembly.
scientia non olet · About LEMON Manuals