LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement (LUJ) >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. If equipped, remove the front compartment splash shield. Refer to Front Compartment Insulator Replacement .
  4. If equipped, remove the engine shield.
    5. Fig 1: Generator Positive Cable, Starter Positive Cable And Ground Cable
    GM2191724Courtesy of GENERAL MOTORS COMPANY
  5. Remove the starter and generator positive cable nut (2).
  6. Remove the starter and generator positive cable (1).
  7. Remove the starter positive cable nut (3).
  8. Remove the starter positive cable (4) from the starter.
  9. Remove the starter ground cable nut (5).
  10. Remove the ground cable (6).
    11. Fig 2: Starter
    GM2191725Courtesy of GENERAL MOTORS COMPANY
  11. Remove the upper starter bolt (2) and the washer (1).
  12. Remove the starter bolt stud (4) and the washer (5).
  13. Remove the starter (3).
scientia non olet · About LEMON Manuals