Fastener Tightening Specifications (LUW)
Fastener Tightening Specifications (LUW)
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Engine Coolant Fan Motor Bolt | 4 N.m | 36 lb in |
| Engine Coolant Fan Resistor Bolt | 4 N.m | 36 lb in |
| Engine Coolant Thermostat Bolt | 8 N.m | 71 lb in |
| Engine Coolant Thermostat Bypass Pipe Bolt | 8 N.m | 71 lb in |
| Engine Coolant Thermostat Housing Bolt | 8 N.m | 71 lb in |
| Engine Coolant Thermostat Housing Retainer Nut | 9 N.m | 80 lb in |
| Engine Oil Cooler Bolt | 8 N.m | 71 lb in |
| Engine Oil Cooler Housing Bolt | 25 N.m | 19 lb ft |
| Engine Oil Cooler Pipe Bolt | 8 N.m | 71 lb in |
| Hood Hold Open Rod Retainer Bracket Bolt | 22 N.m | 17 lb ft |
| Radiator Bracket Bolt | 25 N.m | 18 lb ft |
| Radiator Support Bracket Bolt | 22 N.m | 17 lb ft |
| Water Pump Housing Bolt | 8 N.m | 71 lb in |
| Water Pump Pulley Bolt | 20 N.m (1) | 15 lb ft (1) |
| (1) Recut threads before re-use and insert bolts with screw locking compound. The installation time, including torque inspection, is a maximum of 10 minutes. | ||