Removal Procedure
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
- Drain the cooling system. Refer to Cooling System Draining and Filling (GE-47716 Fill) , Cooling System Draining and Filling (Static Fill) .
- Remove the front intake air duct deflector.
- Remove the front intake air duct bolt (2).
- Remove the front intake air duct (1).
- Remove the radiator grill support. Refer to Radiator Grille Reinforcement Support Replacement .
- Disconnect and unclip the A/C pressure sensor wiring harness (1).
- Remove the 2 protector fenders (2) from the charge air cooler (1).
- Disconnect the radiator outlet hose and the radiator inlet hose from the radiator. Refer to Radiator Outlet Hose Replacement (LUW) , Radiator Outlet Hose Replacement (LUJ) , and Radiator Inlet Hose Replacement (LUW) , Radiator Inlet Hose Replacement (LUJ) .
- If equipped, remove the transmission fluid cooler inlet pipe from the radiator. Refer to Transmission Fluid Cooler Inlet Pipe Replacement (LUJ) , Transmission Fluid Cooler Inlet Pipe Replacement (LUW) .
- If equipped, remove the transmission fluid cooler outlet pipe from the radiator. Refer to Transmission Fluid Cooler Outlet Pipe Replacement (LUW) , Transmission Fluid Cooler Outlet Pipe Replacement (LUJ) .
- Unclip the engine coolant fan shroud from the radiator.
- Remove the 2 radiator upper bracket bolts (1) and the 2 radiator upper brackets (2).
- Remove the radiator (1) from the 2 lower brackets (2).
- Use care and rotate the radiator in order to gain more access for the removal.
- Use care and lift the radiator up and away from the vehicle.