LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Coolant Fan Resistor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Engine Coolant Fan Resistor Wiring Harness Connector
    GM2028322Courtesy of GENERAL MOTORS COMPANY
  1. Install the engine coolant fan resistor (1).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the engine coolant fan resistor bolt (2) and tighten to 4 N.m (36 lb in).
  3. Connect the engine coolant fan resistor wiring harness plug.
  4. Connect the negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals