LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LUJ) >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. If equipped, remove the front compartment splash shield. Refer to Front Compartment Insulator Replacement .
  5. If equipped, remove the engine shield.
    6. Fig 1: Generator Positive Cable And Generator Wiring Harness Connector
    GM2191719Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the generator wiring harness connector (3).
  7. Remove the generator positive cable nut (1).
  8. Remove the generator positive cable (2).
  9. Remove the lower bolt and loosen the upper bolt of the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  10. Lower the vehicle.
    11. Fig 2: Generator And Bolts
    GM2191720Courtesy of GENERAL MOTORS COMPANY
  11. Remove the 2 generator bolts (2).
  12. Remove the generator (1) from above.
scientia non olet · About LEMON Manuals