LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Corvette Z06 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment System >> Repair Instructions >> Rear Camber Adjustment >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: Control Arm & Stabilizer Shaft Link
    GM922511Courtesy of GENERAL MOTORS COMPANY
  3. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts from the lower control arms.
  4. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts and links from the shaft.
scientia non olet · About LEMON Manuals