Installation Procedure

Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows .

Fig 1: Applique To Windshield Frame

Courtesy of GENERAL MOTORS COMPANY

Install the windshield side reveal moldings. Refer to Windshield Side Reveal Molding Replacement (Coupe and Convertible) , Windshield Side Reveal Molding Replacement (Hardtop) .

Fig 2: Windshield Weather-Strip

Courtesy of GENERAL MOTORS COMPANY

Install the windshield weatherstrip. Refer to Windshield Frame Weatherstrip Replacement .

Fig 3: Rearmost Screws At Top Of Fender To Wheelhouse

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Install the fender mounting screws.
Tighten

Tighten the screws to 1.9 N.m (17 lb in).

Fig 4: Air Inlet Grille Panel

Courtesy of GENERAL MOTORS COMPANY

Fig 5: Plenum To Hood Seal

Courtesy of GENERAL MOTORS COMPANY

Install the air inlet screen seal. Refer to Air Inlet Grille Panel Replacement .
Install the windshield wiper arms and washer hoses. Refer to Windshield Wiper Arm Replacement , and Windshield Washer Hose Replacement .

Fig 6: Windshield Side Garnish Moldings & Retainer Clips To Windshield Frame

Courtesy of GENERAL MOTORS COMPANY

Fig 7: View Of Inside Rearview Mirror

Courtesy of GENERAL MOTORS COMPANY

Remove the rearview mirror. Refer to Inside Rearview Mirror Replacement (DD8) , Inside Rearview Mirror Replacement (Except DD8) .
Perform the appropriate step:
- For the coupe, install the roof lift-off panel.
- For the convertible, raise and close the folding top.
Close the door windows.
Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
Close the hood.