LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> Steering >> Steering Linkage System >> Repair Instructions >> Relay Rod Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Inner Tie Rod To Relay Rod Retaining Nut
    GM858410Courtesy of GENERAL MOTORS COMPANY
  1. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Loosen the inner tie rods to relay rod retaining nuts using J 34028 .
    3. Fig 2: Inner Tie Rod To Relay Rod Retaining Nut
    GM832413Courtesy of GENERAL MOTORS COMPANY
  3. Remove the inner tie rods to the relay rod retaining nuts.
    4. Fig 3: Identifying Inner Tie Rods
    GM837714Courtesy of GENERAL MOTORS COMPANY
  4. Rotate the steering linkage to remove the inner tie rods from the relay rod.
    5. Fig 4: Idler Arm To Relay Rod Retaining Nut
    GM828852Courtesy of GENERAL MOTORS COMPANY
  5. Remove the idler arm to relay rod retaining nut . Discard the nut.
    6. Fig 5: Pitman Arm To Relay Rod Nut (Non Rack and Pinion)
    GM828839Courtesy of GENERAL MOTORS COMPANY
  6. Remove the pitman arm retaining nut . Discard the nut.
    7. Fig 6: Disconnecting Idler Arm From Relay Rod
    GM832356Courtesy of GENERAL MOTORS COMPANY
  7. Disconnect the relay rod from the idler arm using the J 43631 .
    8. Fig 7: View Of Pitman Arm & Relay Rod (Non Rack & Pinion)
    GM832396Courtesy of GENERAL MOTORS COMPANY
  8. Disconnect the relay rod from the pitman arm using the J 24319-B .
  9. Remove the relay rod from the vehicle.
scientia non olet · About LEMON Manuals