LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Captiva Sport LT, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.0L - Repair Instructions >> Repair Instructions >> Fuel Pump Replacement >> Removal Procedure

Removal Procedure

  1. Relieve the low and high side fuel system pressure. Refer to Fuel Pressure Relief .
  2. Remove the high pressure fuel pump shield. Refer to Fuel Pipe Shield Replacement (LF1 or LFW) .
    3. Fig 1: Identifying High Pressure Fuel Pump Components
    GM2221135Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the engine wiring harness electrical connector from the high pressure fuel pump.
  4. Remove the low pressure feed pipe. Refer to Fuel Feed Pipe Replacement (LF1 or LFW) .
  5. Remove the high pressure pipe. Discard the pipe. Refer to Fuel Feed Intermediate Pipe Replacement (LF1 or LFW) .
  6. Remove and discard the high pressure fuel pump bolts (1).
  7. Remove the high pressure fuel pump (2).
  8. Remove and discard the high pressure fuel pump O-ring (3).
  9. Remove and discard the high pressure fuel pump gasket (4).
  10. Remove the high pressure fuel pump roller lifter (5).
scientia non olet · About LEMON Manuals