LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Caprice 6.0 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (HVAC System - Automatic) >> Repair Instructions >> HVAC Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the close out panel, if equipped. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Remove the right side floor air outlet duct. Refer to Floor Air Outlet Duct Replacement - Right Side (LHD) .
  3. Remove the right hand hinge panel. Refer to Body Hinge Pillar Trim Panel Replacement .
    4. Fig 1: Identifying HVAC Control Module Electrical Connectors
    GM2043970Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the HVAC control module electrical connectors (1).
    5. Fig 2: Identifying HVAC Control Module & HVAC Module Assembly Retaining Screws
    GM2043973Courtesy of GENERAL MOTORS CORP.
  5. Remove the HVAC control module to HVAC module assembly retaining screws (1).
  6. Remove the HVAC control module (2) from the HVAC module assembly (3).
scientia non olet · About LEMON Manuals