LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Caprice 6.0 2 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 6.0L - Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Electrical Connector And Fuel Tank Pressure Sensor
    GM2214631Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connector (2) from the fuel tank pressure sensor (1).
    3. NOTE:

    Do not damage the retainer (5).

  3. Unlock and lift the retainer (5).
  4. Release the retainers (4).
  5. Pull the fuel tank pressure sensor (1) upward to remove the fuel tank pressure sensor (1) from the fuel tank (6).
  6. Remove the fuel tank pressure sensor seal (3)
  7. Discard the fuel tank pressure sensor seal (3).
scientia non olet · About LEMON Manuals