Installation Procedure
- Install the front stabilizer shaft to the vehicle.
- Install the front stabilizer shaft insulators. Refer to Stabilizer Shaft Insulator Replacement .
- Install the upper section of the air box. Refer to Air Cleaner Assembly Replacement for 6.0L engine.
- Install the power steering gear inlet pipe/hose bracket bolt (2) to the front suspension frame and tighten to 9 N.m (80 lb in).
- Install the power steering gear outlet pipe/hose bracket bolt (1) to the front suspension frame and tighten to 9 N.m (80 lb in).
- Install the front stabilizer shaft links to the front stabilizer shaft. Refer to Stabilizer Shaft Link Replacement
- Install the outer tie rod end on the steering knuckle. Refer to Steering Linkage Outer Tie Rod Replacement .
- Install the mass air flow (MAF) sensor. Refer to Mass Airflow Sensor with Intake Air Temperature Sensor Replacement for 6.0L engine.
- Install the upper section of the air box. Refer to Air Cleaner Assembly Replacement for 6.0L engine.
- Install the front wheel. Refer to Tire and Wheel Removal and Installation .
- Remove the safety stands.
- Lower the vehicle to the ground.
CAUTION:
Refer to Fastener Caution .