LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Caprice 3.6 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Knock Sensor Replacement - Bank 2 >> Removal Procedure

Removal Procedure

    Fig 1: Identifying KS Electrical Connector & K Sensor
    GM1949900Courtesy of GENERAL MOTORS COMPANY
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the knock sensor (KS) electrical connector (1) from the KS (2).
    3. Fig 2: Identifying KS To Engine Block Retaining Bolt
    GM1949901Courtesy of GENERAL MOTORS COMPANY
  3. Remove the KS to engine block retaining bolt (1) from the KS.
  4. Remove the KS (2) from the engine.
scientia non olet · About LEMON Manuals