LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Caprice 3.6 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Knock Sensor Replacement - Bank 2 >> Installation Procedure

Installation Procedure

    Fig 1: Identifying KS To Engine Block Retaining Bolt
    GM1949901Courtesy of GENERAL MOTORS COMPANY
  1. Install the KS (2) to the engine.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the KS to engine block retaining bolt (1) and tighten to 23 N.m (17 lb ft).
    3. Fig 2: Identifying KS Electrical Connector & K Sensor
    GM1949900Courtesy of GENERAL MOTORS COMPANY
  3. Install the KS electrical connector (1) to the KS (2).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals