LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Camaro ZL1, Automatic Trans >> Repair and Diagnosis >> Steering >> Power Steering System >> Diagnostic Information and Procedures >> DTC C047A >> Circuit/System Testing

Circuit/System Testing

  1. With a scan tool perform the Power Steering Control Module Calibration  procedure Steering Angle Sensor Centering and Software Endstop Learning.
  2. Verify that DTC C047A does not set.
    • If the DTC does set 

      Replace the K43 Power Steering Control Module.

    • If the DTC does not set 
  3. All OK. Refer to Testing for Intermittent Conditions and Poor Connections
scientia non olet · About LEMON Manuals