Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Sensing and Diagnostic Module Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Base Model Part Number | Varies | The scan tool displays the part number of the SDM which is stored in non volatile memory. |
| Deployment Loop 1-18 Enable Status | Enabled/Disabled | The scan tool displays Enabled or Disabled This is the status of the inflator module where it is capable of deploying when it is enabled. |
| Deployment Loop 1-18 Learn Status | Learned/Not Learned | The scan tool displays Learned or Not learned. Learned is displayed if the SDM has the number loop programmed with the present connected inflator module. |
| Deployment Loop 1-18 Resistance | Ohms | The scan tool displays the resistance of the loop with the inflator module connected. |
| Deployment Loop 1-18 Type | Equipped/Not Equipped | The scan tool displays the resistance of the loop with the inflator module connected. Not Used, Left Frontal Deployment Loop Stage 1, Right Frontal Deployment Loop Stage 1, Left Frontal Deployment Loop Stage 2, Left Frontal Deployment Loop Stage 2, Left Front Seat Pretensioner, Right Front Seat Pretensioner, Left Front Side Bag, Right Front Side Bag, Left Roof Rail Airbag, Right Roof Rail Airbag |
| Driver Seat Belt Sensor Enable Status | Enabled/Disabled | The scan tool displays if the seat belt sensor in the seat belt buckle is enabled |
| Driver Seat Belt Sensor Learn | Learned/Not learned | The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the driver seat belt sensor. |
| Driver Seat Position Sensor Learn Status | Learned/Not Learned | The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the driver seat position sensor. |
| Driver Seat Belt Status | Buckled/Unbuckled | The scan tool displays Buckled or Unbuckled. This is the state of the driver seat belt switch in the driver seat belt buckle. |
| Impact Sensor 1-8 Enable Status | Enabled/Disabled | The scan tool displays Enabled or Disabled. This is the state of the sensor. |
| Impact Sensor 1-8 Learn Status | Learned/Not learned | The scan tool displays Learned or Not learned. Learned is displayed if the SDM has the sensor programmed. |
| Impact Sensor 1-8 Type | Equipped/Not Equipped | The scan tool displays the type of Side Impact Sensor connected. Not Equipped, Left Front Side Impact Sensor, Right Front Side Impact Sensor, Left Rear Side Impact Sensor, Right Rear Side Impact Sensor. |
| Passenger Seat Belt Status | Buckled/Unbuckled | The scan tool displays Buckled or Unbuckled. This is the state of the passenger seat belt switch in the passenger seat belt buckle. |
| Passenger Airbag Disabled Switch | ON/OFF | The scan tool displays ON or OFF Passenger Disabled Switch whenever the passenger airbag is enabled or disabled manually. |
| Passenger Airbag ON Indicator | ON/OFF | The scan tool displays ON when the passenger indicator is illuminated and OFF when passenger indicator is disabled. |
| Passenger Seat Belt Sensor Enable Status | Enabled/Disabled | The scan tool displays Enabled or Disabled This is the status of the passenger seat belt reminder indicator where when it is enabled it is illuminated. |
| Passenger Seat Belt Sensor Learn Status | Learned/Not learned | The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the passenger seat belt reminder sensor. |
| Passenger Seat Belt Reminder Indicator Enable status | Enabled/Disable | The scan tool displays Enabled or Disabled is displayed if the SDM has the passenger seat belt indicator programmed. |
| Passenger Seat Belt Reminder Indicator Learn Status | Learned/Not Learned | The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the passenger seat belt reminder sensor. |
| Passenger Seat Position Enable Status | Enabled/Disabled | The scan tool displays if the seat position sensor of the passenger seat is enabled |
| Passenger Seat Position Sensor Learn Status | Learned/Not Learned | The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the passenger seat position sensor. |
| Enabled/Disabled | Valid/Invalid | The scan tool displays the primary key that the SDM has stored to memory. |
| Vehicle Identification Number | Varies | The VIN number of the vehicle programmed into the SDM. |