LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Shift Lock Control System) >> Diagnostic Information and Procedures >> Transmission Control Lever Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.

Dynamic Test

  1. Install a 10 A fused jumper wire between the control terminal 3 and 12 V. Momentarily install a jumper wire between the ground terminal 1 and ground.
  2. Verify the solenoid turns on & off/clicks, etc.
    • If the solenoid does not turn on & off/clicks, etc. 

      Replace the S3 transmission shift lever.

    • If the solenoid does turn on & off/clicks, etc. 
  3. All OK