Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Front Lower Control Arm Bushing Bolt (1)
First Pass	55 N.m	41 lb ft
Final Pass	plus 100 degrees
Front Lower Control Arm Rear Mount Bolts (1)
First Pass	70 N.m	52 lb ft
Final Pass	plus 85 degrees
Front Lower Control Arm Bolt at the Frame (1)
First Pass	70 N.m	52 lb ft
Final Pass	plus 80 degrees
Front Stabilizer Shaft Link Nuts (2)	65 N.m	48 lb ft
Front Stabilizer Shaft Insulator Bolts (1)
First Pass	22 N.m	16 lb ft
Final Pass	plus 40 degrees
Front Strut Nuts (at the knuckle) (2)
First Pass	85 N.m	63 lb ft
Final Pass	plus 65 degrees
Front Strut Nut (at the upper mount)	70 N.m	52 lb ft
Front Strut Shaft Nut	45 N.m	33 lb ft
Front Wheel Bearing and Hub Bolts
First Pass	100 N.m	74 lb ft
Final Pass	plus 60 degrees
Lower Control Arm Ball Joint Nut (1)
First Pass	50 N.m	37 lb ft
Second Pass	loosen 120 degrees
Third Pass	50 N.m	37 lb ft
Final Pass	plus 35 degrees
(1) Use only NEW Bolts (2) Use only NEW Nuts