Circuit/System Verification
- Ignition ON, verify that DTC C0186, C0196 or C0710 is not set.
- If DTC is set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Verify the B119 Multi-axis Acceleration Sensor is mounted properly.
- If not mounted properly, refer to Vehicle Yaw Sensor with Vehicle Lateral and Longitudinal Accelerometer Replacement .
- Clear DTC, test drive vehicle under normal driving conditions.
- Verify DTC C0252 is not set.
- If the DTC is set replace the K17 EBCM and verify the DTC does not reset. If the DTC resets, replace the Q5 brake pressure modulator valve assembly.