LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Volt >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Keyless Entry System And Remote Functions >> Diagnostic Information and Procedures >> DTC B097B >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the S38 ignition mode switch.
  2. With the button released, test for 4.5-5.5 KΩ between the signal terminal 3 and the low reference terminal 7.
    • If not within the specified range, replace the S38 ignition mode switch.
  3. With the button pressed, test for 1-1.5 KΩ between the signal terminal 3 and the low reference terminal 7.
    • If not within the specified range, replace the S38 ignition mode switch.