Washer Switch Test
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the X1 harness connector at the S82 windshield wiper/washer switch.
- Test for less that 5 Ω between signal circuit terminal 5 and ground.
- If not the specified range, replace the S82 windshield wiper/washer switch.
- Test for less that 5 Ω between signal circuit terminal 4 and ground.
- If not the specified range, replace the S82 windshield wiper/washer switch.