LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Object Detection System) >> Diagnostic Information and Procedures >> DTC B0954, B0955, B0956, or B0957 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC B1405 is not present.
  2. Verify that DTC B0954 01, B0955 01, B0956 01 or B0957 01 is not present.
    • If DTC is present, check the appropriate sensor for contamination with mud, ice or snow. If no contamination is diagnosed, refer to Circuit/System Testing .
  3. Verify that DTC B0954 21, B0955 21, B0956 21 or B0957 21 is not present.
    • If DTC is present, check the respective sensor for contamination by mud, ice or snow. If no contamination is diagnosed, replace the sensor.
  4. Verify that DTC B0954 3A, B0955 3A, B0956 3A or B0957 3A is not present.
    • If DTC is present, replace the respective sensor with a sensor of correct sensor type.
  5. Ignition ON, transmission in REVERSE, verify the scan tool Parking Assist System Status parameter displays Enabled.