LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Disc Brake System) >> Repair Instructions >> Front Brake Rotor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Brake Dust Warning .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: Identifying Brake Caliper Bracket Bolts
    GM2216194Courtesy of GENERAL MOTORS CORP.
  3. Remove the brake caliper bracket bolts (1).
    4. CAUTION: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.
  4. Without disconnecting the brake caliper hose, remove the brake caliper and bracket assembly and support with heavy mechanics wire or equivalent.
  5. If installing the original brake rotor, mark the relationship of the rotor to the wheel hub.
    6. Fig 2: Identifying Brake Rotor Bolt
    GM2216195Courtesy of GENERAL MOTORS CORP.
  6. Remove the brake rotor bolt (1).
    7. Fig 3: View Of Disc Brake Rotor
    GM2216197Courtesy of GENERAL MOTORS CORP.
  7. Remove the brake rotor (1).
scientia non olet · About LEMON Manuals