LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 277 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Negative Battery Cable Ground Bolt
    GM1860989Courtesy of GENERAL MOTORS COMPANY
  1. Position the negative battery cable to the battery box. (battery shown removed for clarity).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the negative battery cable ground bolt (2).

    Tighten 

    Tighten the bolt to 25 N.m (18 lb ft).

    3. Fig 2: Body Wiring Harness Electrical Connector And Negative Battery Cable Electrical Connector
    GM1860988Courtesy of GENERAL MOTORS COMPANY
  3. Connect the body wiring harness electrical connector (4) to the negative battery cable electrical connector (1).
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals