LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (LF1) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill LF1)  or Cooling System Draining and Filling - Vac-N-Fill (GE 47716)  or Cooling System Draining and Filling (Static Fill LAU) .
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
    3. Fig 1: View Of Radiator Inlet Hose & Clamp
    GM2219074Courtesy of GENERAL MOTORS CORP.
  3. Disengage tension on the radiator inlet hose clamp (1) at the radiator using BO-38185:  Hose Clamp Pliers.
  4. Remove the radiator inlet hose (2) from the radiator.
    5. Fig 2: Identifying Radiator Inlet Hose
    GM2219077Courtesy of GENERAL MOTORS CORP.
  5. Unclip radiator inlet hose connector (1) and remove the radiator inlet hose (2) from the engine.
  6. Remove the radiator inlet hose from the vehicle.
scientia non olet · About LEMON Manuals