LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Silverado 3500 HD, 2D Pickup, 6.6 L, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.6L (LGH Or LML) - Repair Instructions >> Repair Instructions >> Fuel Sender Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Sender Assembly And O-Ring
    GM2407921Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel sender assembly (1) and O-ring (2).
    2. Fig 2: Identifying Cam Lock Ring
    GM2407919Courtesy of GENERAL MOTORS CORP.
  2. Using the CH-45722:  wrench, install the cam lock ring (1) by turning clockwise.
    3. Fig 3: Identifying Fuel Feed And Return Pipes
    GM2407918Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel feed and return pipes (1). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the fuel tank. Refer to Fuel Tank Replacement (Cab/Chassis - Front)  or Fuel Tank Replacement (Cab/Chassis - Rear)  or Fuel Tank Replacement (Pickup) .
scientia non olet · About LEMON Manuals