Remote Control Door Lock Receiver Replacement

Fig 1: View Of Remote Control Door Lock Receiver

GM1803361

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedures

Remove the body lock pillar trim panel. Refer to Body Lock Pillar Trim Replacement (Regular Cab) or Body Lock Pillar Trim Replacement (Crew Cab) or Body Lock Pillar Trim Replacement (Extended Cab) .
Disconnect the remote control door lock receiver antenna. Refer to Keyless Entry Antenna Replacement (Regular Cab) or Keyless Entry Antenna Replacement (Extended/Crew Cab) .

1

Remote Control Door Lock Receiver
Tip:

The module slides and snaps into the body structure.
Disconnect the electrical connector.
If a replacement module is installed, program the module. Refer to Control Module References .