LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Silverado 2500 HD, 2D Pickup, 6.0 G, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Controls And Fuel - 4.8L, 5.3L, 6.0L, 6.2L - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement

Fuel Pump Flow Control Module Replacement

Fig 1: Identifying Fuel Pump Flow Control Module And Fasteners
GM2486368Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the spare tire. Refer to Spare Wheel Hoist Replacement .
1 Fuel Pump Flow Control Module Fastener (Qty: 3)
CAUTION: Refer to Fastener Caution .

Procedure: 
Partially loosen the fasteners from the slotted bracket.

Tighten:  6 N.m (53 lb in)
2 Fuel Pump Flow Control Module

Procedure

  1. Disconnect the electrical connector.
  2. If replacing, reprogram the module. Refer to Control Module References .
scientia non olet · About LEMON Manuals