Easy Exit Seat

WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

If the vehicle has this feature, it allows you to select your preference for the easy exit seat feature.

Press the customization button until EASY EXIT SEAT appears in the display. Press the set/reset button to access the settings for this feature. Then press the customization button to scroll through the following choices:

OFF (default): No seat exit recall will occur.
ON: The driver's seat will move back when the key is removed from the ignition.
The automatic easy exit seat movement will only occur one time after the key is removed from the ignition. If the automatic movement has already occurred and you put the key back in the ignition and remove it again, the seat will stay in the original exit position, unless a memory recall took place prior to removing the key again.
NO CHANGE: No change will be made to this feature. The current setting will remain.

Select one of the available choices and press the set/reset button while it is displayed on the DIC to select it.