LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 1420 (Engine Controls/Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Spark Plug Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

This engine has aluminum cylinder heads. Do not remove the spark plugs from a hot engine, allow it to cool first. Removing the spark plugs from a hot engine may cause spark plug thread damage or cylinder head damage.

    Fig 1: View Of Ignition Coils
    GM1578474Courtesy of GENERAL MOTORS COMPANY
  1. Remove the ignition coil(s). Refer to Ignition Coil Replacement (LE5, LE9, or LAF) .
  2. NOTE:

    Make sure that any water and/or debris is blown out of the spark plug holes prior to removing the spark plugs.

  3. Remove the spark plugs using a 5/8 inch spark plug socket.