Installation Procedure
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate the CKP sensor O-ring seal with clean engine oil.
- Install the CKP sensor.
- Install the CKP sensor bolt and tighten to 10 N.m (89 lb in).
- Connect the engine wiring harness electrical connector (1) to the CKP sensor.
- Install the starter. Refer to Starter Replacement (LE5/LE9) .
- Perform the crankshaft position system variation learn procedure. Refer to Crankshaft Position System Variation Learn .
CAUTION:
Refer to Fastener Caution .