Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying CMP Sensor

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Inspect the CMP sensor for damage, replace as necessary.

Lubricate the CMP sensor O-ring seal with clean engine oil.
Install the CMP sensor.

CAUTION:

Refer to Fastener Caution .

Install the CMP sensor bolt and tighten to 10 N.m (89 lb in).

Fig 2: View Of Intake Manifold Cover & Attachments

Courtesy of GENERAL MOTORS COMPANY

Connect the engine wiring harness electrical connector (7) to the intake CMP sensor (6).
Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .