LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 1375 (Wiper System And Washer System) >> Repair Instructions >> Windshield Washer Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .
    2. Fig 1: Disconnecting Washer Solvent Container Level Sensor Electrical Connector
    GM1207514Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the washer pump electrical connector.
  3. Disconnect the washer pump hose (2) from the washer pump (5).
  4. Using a small flat-bladed tool, remove the washer pump from the washer solvent container (1).
  5. Drain the windshield washer solvent into a clean suitable container.
  6. Using a small flat-bladed tool, remove the washer pump terminal seal (6) from the washer solvent container (1).
scientia non olet · About LEMON Manuals