LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 1139 (Shift Interlock System) >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Automatic Transaxle Shift Lock Actuator Electrical Connector
    GM1218843Courtesy of GENERAL MOTORS CORP.
  1. Install both ends of the automatic transaxle shift lock actuator to the pivot points.
  2. Connect the automatic transaxle shift lock actuator electrical connector (1).
  3. Install the center console. Refer to Front Floor Console Replacement .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (RPOs LZE/LZ4/LGD) .
scientia non olet · About LEMON Manuals