Rear Toe Adjustment

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inner Toe Link Cam Bolt & Nuts

Courtesy of GENERAL MOTORS CORP.

Loosen the inner toe link cam bolt and nuts.
Rotate the cam bolt to the required toe specification settings. Refer to Wheel Alignment Measurement .

NOTE: Refer to Fastener Notice .

Maintain the toe setting while tightening the cam bolt nut.
Tighten: Tighten the rear suspension adjustment link lock nut to 110 N.m (81 lb ft).
Check the toe setting after tightening.
Adjust the toe setting if necessary.