LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.5L - Repair Instructions >> Repair Instructions >> Knock Sensor Replacement - Bank 1 >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Electrical Connector
    GM1612884Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the left knock sensor electrical connector (1).
    3. Fig 2: Identifying Knock Sensor
    GM1800585Courtesy of GENERAL MOTORS CORP.
  3. Loosen and remove the knock sensor.
scientia non olet · About LEMON Manuals