LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.5L - Repair Instructions >> Repair Instructions >> Air Cleaner Outlet Duct Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Air Inlet Duct & MAF/IAT Sensor
    GM1556020Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner outlet duct from the MAF/IAT sensor.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.

    Tighten:  Tighten the clamp to 3 N.m (27 lb in).

  3. Install the air cleaner outlet duct to the throttle body.
  4. Tighten the air cleaner outlet duct clamp at the throttle body.

    Tighten:  Tighten the clamp to 3 N.m (27 lb in).

  5. Connect the PCV tube to the air inlet duct. Refer to Plastic Collar Quick Connect Fitting Service .
  6. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals