LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> HHR LT, 2.2 W, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Negative Battery Cable
    GM1631636Courtesy of GENERAL MOTORS COMPANY
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement .
  2. Remove the tape securing the battery current sensor to the negative battery cable.
    3. Fig 2: Battery Current Sensor
    GM1631638Courtesy of GENERAL MOTORS COMPANY
  3. Remove the battery current sensor from the negative battery cable.
scientia non olet · About LEMON Manuals