Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Ball Joint to Steering Knuckle Nut | ||
|
50 N.m Reverse Nut 3/4 turn |
37 lb ft Reverse Nut 3/4 turn |
|
50 N.m plus 30 degrees | 37 lb ft plus 30 degrees |
| Control Arm to Front Frame Bolts | 55 N.m | 41 lb ft |
| Control Arm to Rear Frame Bolts | 100 N.m plus 180 degrees | 74 lb ft plus 180 degrees |
| Frame to Chassis Bolts | 100 N.m plus 180 degrees | 74 lb ft plus 180 degrees |
| Intermediate Shaft Pinch Bolt | 34 N.m | 25 lb ft |
| Stabilizer Link to Strut Nut | 80 N.m | 59 lb ft |
| Stabilizer Shaft Clamp Bolt | 50 N.m | 37 lb ft |
| Stabilizer Shaft Clamp Nut | 50 N.m | 37 lb ft |
| Stabilizer Shaft Link to Stabilizer Bar Nut | 80 N.m | 59 lb ft |
| Strut Assembly to Steering Knuckle Nut | 120 N.m | 89 lb ft |
| Strut to Body Nut | 20 N.m | 15 lb ft |
| Strut Shaft Nut | 70 N.m | 52 lb ft |
| Transmission Mount Through Bolt | 100 N.m | 74 lb ft |
| Transmission Mount to Frame Bolt | 50 N.m | 37 lb ft |
| Wheel Bearing/Hub Assembly Mounting Bolts | 115 N.m | 85 lb ft |