LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> HHR LS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.2L Or 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Fuel Tank & Fuel Pressure Sensor Electrical Connector
    GM1636698Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel pressure sensor electrical connector (1).
    3. Fig 2: Fuel Tank Pressure Sensor
    GM1636702Courtesy of GENERAL MOTORS COMPANY
  3. Position 2 flat-bladed screwdrivers, one on each side of the sensor, near the vacuum port.
  4. Release the retaining tabs and remove the fuel tank pressure sensor.
scientia non olet · About LEMON Manuals