LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> HHR LS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.2L Or 2.4L - Repair Instructions >> Repair Instructions >> Accelerator Pedal with Position Sensor Assembly Replacement >> Removal Procedure

Removal Procedure

    Fig 1: APP Sensor Electrical Connector
    GM1633081Courtesy of GENERAL MOTORS COMPANY
  1. Remove the knee bolster. Refer to Knee Bolster Replacement .
  2. Remove the insulator panel. Instrument Panel Insulator Replacement .
  3. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).
    4. Fig 2: APP Sensor
    GM1633085Courtesy of GENERAL MOTORS COMPANY
  4. Remove the APP sensor nuts.
  5. Remove the APP sensor.
scientia non olet · About LEMON Manuals